IOGear GHSW8241, User Manual

Page: 13 / 20

13
The formulas for Switch Mode Commands are as follows:
1. Switch C Input C Port Control [Enter]
- For example, to enable Auto Mode for port 02, type the following:
swmode i02 auto [Enter]
2. Switch C Control [Enter]
- For example, to enable Next Mode, type the following: swmode next
[Enter]
3. Switch C Control [Enter]
- For example, to enable Default Mode to disable Next / Auto mode,
type the following: swmode default [Enter]
4. Switch C Control [Enter}
- For example, to enable the Go To function, type the following:
swmode goto on [Enter]
The following tables show the possible values and formats for the Switch
Mode Command formulas:
Command Description
swmode Switch Mode Command
Control Description
default No automatic switching
next Priority is placed on the next port that has a new source
connected to it (default setting)
auto Priority is placed on a selected port
goto on Switch to the next port with a powered on source device
when the current input source is off
goto off Disable Go To (default setting)
Input Description
i Input Command
Port Number Description
xx 01-04 (default is 01)