11.
.
.
.
.
.
Moisture build up on
interior or exterior
of the Beverage cooler.
.
.
.
.
.
The door will not
close properly.
.
The cooler is not level.
Level the cooler.
The door was reversed and
not properly installed.
Re-install the door properly.
The gasket is dirty.
Clean the door gasket.
The shelves are out of
position.
Place the shelves properly.
This is normal during high
humidity periods.
Lower the room humidity.
Prolonged or frequent door
openings.
Open the door less often.
The door does not seal
completely.
Check door gaskets
for proper seal.
This is normal in high
temperature environment.
Move the cooler to a cooler
place, and avoid heat and
sunlight.
Error Code:
E1-E2-E3-E4-E7-E8
A sensor has failed.
Contact the customer service
PROBLEM
POSSIBLE CAUSE
SOLUTION
Summary of Contents for IOB150BB
