13
2.4
Removing and Installing the SAS Expander Module
NOTE:
Do not leave the HDD drawer open for more than 1 minute to prevent overheating.
2.4.1
Removing the SAS Expander Module
Step 1: Open the HDD drawer. (Please refer to 2.1.1)
Step 2: Loosen the thumbscrews and the screws of the SAS expander module
cover, then remove the cable management cover.
Step 3: Remove the cable from the SAS expander module.
Step 4: Loosen the thumbscrew of the module.
Step 5: Lift the SAS e
xpander module’s cover outward.
Step 6: Pull out the SAS expander module.
Step 2
Step 3
Step 4
Step 5
Step 6
Unplug
the Cables
Pull
