12
2.3
Removing and Installing the PSU Module
The IW-RS448-05 includes a redundant power supply with two power supply units. With
this feature, the system is capable of functioning if one of the modules fail. To replace it,
the user only needs to remove the failed module and insert a functional module.
NOTE:
1. The unit supports InWin PSU modules only, please do not attempt to insert any other
module brands.
2.
The two PSU modules’ output wattage must be the same.
2.3.1
Removing the PSU Module
Step 1: Loosen the thumbscrew of the power supply module.
Step 2: Press the handle and pull the power module outwards.
Step 1
Step 2
2.3.2
Installing the PSU Module
Step 1: Make sure the label is facing upward, and push the power supply module
into the power supply housing until it clicks.
Step 2: Tighten the
thumbscrew on the power supply module
.
Step 1
Step 2
Pull
Push
Press
