14
Pull out the middle rail to the stop position.
Move the ball bearing retainer to the front end of the middle rail, and it should click into the
locked position.
Insert the inner rails of the chassis into the middle rails on both sides of the rack.
Push the chassis to the stop position, and then release the blue slide tab (by either pulling the
tab forward or pushing the tab back) to continue.
Until reaching the second stop position, release the blue slide tab again to continue.
Push the chassis into position on the rack completely. Make sure that the front end of the
chassis is aligned with the edge of the rack to complete the installation.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
2.6.5 Inserting the Chassis to the Cabinet
