12
The IW-RS208-07 is a rackmount model, which supports EIA-RS310D standard cabinets and chassis
racks. InWin provides standard slide rails to allow users to mount the chassis onto the cabinets.
2.6 Installing the Slide Rail
Step 1 - 2
Step 1 - 2
Step 3
The slide rail by your order might be different. You can reference the quick installation guide inside the
slide rail package and follow the instructions to mount the rail onto your cabinet or chassis rack.
Pull out the inner rail until it reaches the stop. Release the blue slide tab to unlock.
Continue pulling the inner rail until the second stops. Release the white slide tab
to remove the inner rail.
Pull the latch on the middle rail upward and retract the middle rail back.
Align the chassis sidewall standoffs to the inner rail keyholes. Slide the inner rail toward
the front until the standoffs snap into place, securing the rail to the chassis.
Repeat the same action on the other side.
When removing the inner rail: Pull up the latch and slide the inner rail forward. Remove
the keyhole from the standoff to detach the inner rail. (Action
❶
and
❷
in the figure)
2.6.1 Identifying the Slide Rail
2.6.2 Removing the Inner Rail and Sliding the Intermediate Rail Back
2.6.3 Attaching the Inner Rail to the Chassis
Step 1:
Step 2:
Step 3:
Step 1:
Step 2:
Step 3:
