4
5
Determine location of lock. Align template with front
of glass and mark drill holes and routed pocket to as-
semble lock base.
Note: Illustrations below shows top view of cabinet.
Tip: Base plate and lock should be positioned close to
swing-out end of door panel. Base plate template should be
positioned no further forward than front edge of cabinet.
1
Glass
Template
Front of Cabinet
Base Plate
Place template 0 mm - 25 mm (0” - 0.98”) from edge of glass.
LOCK ASSEMBLY
Lock should be positioned on swing-out end of panel door
(opposite hinges).
Note: Illustrations in this guide are for installations with lock positioned
on left bottom corner of panel door. Instructions can be inverted if lock
is positioned on different corner.
Hinge
Hinge
Summary of Contents for PL401
Page 1: ...1 Smart Lock Showcase Lock PL401 ...
Page 8: ......
