These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
IMI-574 AVU040082
Mesa
Sheet 3 of 3
3/10/04
IMI-574
INSTALLATION INSTRUCTIONS
IMPORTANT:
Read carefully before installing fixture. Retain for future reference.
TM
WARNING:
Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
E. To replace the ballast tray,
E1
. Open the top of fixture as described in D1 through D3.
E2.
Disconnect the ballast tray completely by disengaging all connectors in
the fixture.
E3.
Disengage all three (3) wing head screws on the tray from the housing.
E4.
Remove the tray using the handle on top of the tray.
E5.
Place new tray back, align bottom edge to the channel and all three (3)
wing head screws to receptacles on housing. Tighten three (3)
screws evenly.
E6.
Re-connect all connectors that were previously disconnected.
E7.
Close the top as described in D9 through D11.
WING HEAD SCREWS
FIG. E
FIG. D2
ENGAGE TO KEEP
DOOR OPEN
DISENGAGE TO
CLOSE DOOR
