INVT SV-DB100 Series, Operation Manual

Page: 30 / 171

1
2
3
4
5
11 12 13 14 15
6
7
8
9
10
The distance between the servo motor and
the servo drive should not be longer than
20m.
Keep a distance of at least 30cm between
the encoder wire, motor cable and power
cable. Neither laying them in one conduit
nor binding them together.
Power
supply
Servo
motor
Above 30mm
Within
20mm
Connector
Wire of the encoder
Connector
Wire of the encoder
The plug of the encoder is subject to the
motor type. There are: cannon plugs
and aviation plugs.
If it is necessary to select shields with good
flexural strength and the diameter should be
above 0.18mm2 (AWG24). Please refer to
the connection below.