Three-phase photovoltaic grid-connected inverter Display operation panel
51
System information
Product model
Product serial no.
Software ver.
Certification area
Control menu
ON/OFF
Clear information
Reset restart
Restore setup
Product model
iMars BG5KTL
Product serial no.
BGTL
100 - 00
System ver.
Ver. 1
: V 1 . 05
Ver. 2
: V 1 . 05
MCU version
: V 1 . 05
Current certification area
AS 4777
ON/OFF control
ON
OFF
Clear all records : Confirm
？
Press ENT key to confirm
.
Press ESC key to cancel
.
Reset restart
Press ENT key to confirm
Press ESC key to cancel
Restore to default setup
Press
ENT key to confirm
Press ESC key to cancel
Grid-tied parameter
Grid-connected parameter
Under-voltage protection
Undervoltage time
Overvoltage protection
Undervoltage time
Under-frequency protection
Under-frequency time
AC undervoltage protection time
200ms
Table 5-4 Inverter parameter setup
Item
LCD display
Instruction
Set address
Set RS485 address
0 0 1
Set RS485 address
01
0
Press “ENT” key under “set RS485
address” interface, and the cursor will
flicker, then press “
” or “
” to edit the
data of the bit where cursor resides, after
editing, press ENT key and the cursor
jumps to next bit. When the cursor is in
the 3
rd
bit and edition is done, press
“ENT” key to complete inverter RS485
address setup. Press “ESC” key to return.
