INVT iMars BG12KTR, Operation Manual

Page: 24 / 68

iMars grid-tied solar inverters Installation
22
No. Installation tools Instruction
5 Allen driver Fasten the screws, remove and install AC wiring box
6 Straight screwdriver For AC wiring
7 Megger Measuring insulation performance and impedance
8 Multimeter Check the circuit and AC and DC voltage
9 Electric iron Weld communications cable
10 Wire crimper Crimp DC terminals
11 Hydraulic clamp Crimp ring terminal for AC wiring
4.2.2 Installation place
Select installation site according to below requirements:
(1) The height of the installation position should ensure that the line of sight is at the same
level as the LCD for viewing the parameters inverter conveniently.
Figure 4.3 Optimal mounting height
(2) The installation site must be well ventilated and away from raindrops or direct sunlight.
(3) There must be enough pre-reserved space around the installation site for convenient
installation and disassembly of the inverter and air convection, as shown in Fig 4.4.
Fig 4.4 Installation spacing