CHV100 Series Close Loop Vector Control Inverter
.38.
Button
Name
Description
Run Key
Start to run the inverter in keypad control mode.
STOP/RESET
Key
In running status, restricted by P7.04, can be used to
stop the inverter.
When fault alarms, can be used to reset the inverter
out of the restriction of P7.04
Shortcut Key
Determined by Function Code P7.03:
0: Jog operation
1: Switch between forward and reverse
2: Clear the UP/DOWN settings.
3: Quick debugging mode1 (by menu)
4: Quick debugging mode2 (by latest order)
5: Quick debugging mode3 (by non-factory setting
parameters)
+
Combination
Key
Pressing the RUN and STOP/RST at the same time
can achieve inverter coast to stop.
5.1.3 Indicator light description
5.1.3.1 Function Indicator Light Description
Function indicator
Description
RUN/TUNE
Extinguished: stop status
Flickering: parameter autotuning status
Light on: operating status
FWD/REV
Extinguished: forward operation
Light on: reverse operation.
LOCAL/REMOT
Extinguished: keypad control
Flickering: terminal control
Light on: communication control
TRIP
Extinguished: normal operation status
Flickering: overload pre-warning status
5.1.3.2 Unit Indicator Light Description
