background image

All-In-One Professional Music-On-Hold
MP3 USB/SD Digital Player/Adapter with Auto Answer
Models: SX8800-4LPE-AA, SX8800-2LPE-AA  

Rev 29

• 

Insert the SD card into the SD card slot and make sure it snaps IN fully

• 

Plug the included AC adapter.  (110/240 V AC to 12V DC)

• 

Confirm that  all 4 Red LED lights in front of  this unit are double blinking

• 

Confirm that STATUS LED light turns ON

 

• 

Use one of your telephones and unplug the cord for L1/L2 from it and connect it to L1/L2 IN jack on
SX8800, now connect  L1/L2 OUT jack to your telephone using the provided phone cord, make sure
you have dial tone on your lines 1 and 2

• 

Now unplug the cord for L3/L4 from your phone and connect it to L3/L4 IN jack on SX8800 

(the rightmost

jack)

 and connect L3/L4 OUT jack on SX8800 

(2

nd

 jack from right)

 to your telephone using the provided

phone cord, make sure you have dial tone on your lines 3 and 4

• 

Observe that as you connect the lines the blinking lights turn OFF. 

(on non existing lines the lights keep blinking

and that is OK)

• 

• 

• 

• 

Alternatively you may use a splitter (T adapter) at the Wall jack to connect  both this device and a
telephone 

(in that case the L1/L2 OUT and L3/L4 OUT jacks are not connected)

• 

• 

• 

• 

Turn the Speaker ON and Adjust the volume to mid level.

 

  

                      

     

 

           

  

 

 

L1/L2

IN

L3/L4

IN

L3/L4

OUT

110/240 V

 L1   L2

VOLUME  TONE

  1  2

STATUS

SD Card slot

Please note: just one telephone may be
connected to this device, other telephones
remain connected to their own wall jacks.

L1/L2

OUT

 

 OUTPUT 

 

 MODE

 

 INPUT

 

 BANK

  1 2 3

 

 12VDC

 

 600

  8

        

 

 SD EXT

 

 EXT

  1 2 3

3/4

1/2

 

 

USB

      

 

 L3    L4

A B C

A B C

SD Card

OFF ON    OFF ON

 BASS    SPEAKER

 

 Back of SX8800

 

 Front  of SX8800

Summary of Contents for SX8800-2LPE-AA












Reviews: