Other settings:
for
GE 2-9487GE2-A , GE 2-9488GE2-A
and
RCA
25403
phones use the
B3 setting and follow the instructions on page 3 it should work by just
pressing the HOLD button, if still it did not work use the B1 or B2 settings Via
Flash then Hold-see page 4 for full details, these two models of GE phones
beep every 3 seconds and do not work in C1 or C2 settings.
Special Case:
If audio activates suddenly in A1 or A2 switch settings ,
your lines may be “too powerful”
Try A3 setting.
Digital Player Advanced Features:
Player /repeater with full recording capability
Dual Banks
Dual function Input /Output 8
Ω
Package Content:
SX8500 Digital Player/Recorder/adapter unit
Power adapter 110v AC to 12v AC 600 ma
3.5mm male to 3.5mm male audio cord 6’
2 Rj-14 phone cords
User’s Manual
MX9008 or MX9017 True Audio Card (optional)
MX9008 “True Audio Card”
The MX9008 is a Flash card usually pre-recorded with the audio prior to your
installation and it holds the audio all the time even if power is removed. When the
power is restored the play back automatically resumes from the MX9008 card. To re-
install the MX9008 card or install another MX9008
just remove it and then plug the
new one in
. This device is designed for automatic player turn OFF once the flash
card is removed, and it automatically turns ON in 2 seconds when the flash card is
re-inserted. If you had any trouble remove the power by un plugging the AC adapter
from the player, Install the new MX9008 card, then apply the power.
Unlike other Flash based cards that compress the audio, voice and audio signals are
recorded directly into solid state memory in the MX9008 card in their natural, un-
compressed form, providing superior quality voice and music
Message Duration:
There is a total of 8 minutes 20 seconds available for recordings
of Bank1 and Bank2 with MX9008 card and 17minutes with MX9017 card.
BANK Selection:
There are 2 Banks in SX8500, BANK1 & BANK2 - one Bank holds
the primary audio file, the other BANK holds the extra audio file(optional) such as
“Holidays”, special events, weekend special sales, promotions, etc. You can switch
from Bank1 to Bank2 or vise versa any time via the BANK selection switch.
Adjusting Output VOLUME
If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too
loud turn the VOLUME control counter clockwise to desired level.
Dual function input/output RCA jack
( 8
Ω
)
If the Flash card is inserted, the Audio OUT RCA jack is output for an external use as
well as being used internally for the adapter. To connect a speaker to Audio OUT
jack be sure to use a 5 inch or smaller speaker to avoid overloading the out put
beyond it’s limits. If the Flash card is removed, the built in digital player turns OFF
and AUDIO OUT jack can be used as “input” for connection to an external audio
source for the adapter function.
Manual Recording:
Connecting to an external audio source:
Connect the Audio IN jack to your audio source speaker or headphone jack using
the provided 3.5mm to 3.5 mm audio cord. Select the bank you want to record
1.
Press REC to stop the playback, GREEN/ RED STATUS LEDs Blink ON/OFF
continuously.
2.
Start your music/audio, email MP3 file etc. Recording starts
automatically
(or
you may press REC to start recording manually if you prefer)
3.
RED STATUS LED light turns ON solid to indicate recording in progress.
4. Recording stops automatically after 15 seconds of silence in the end of
recording, the unit then removes the silences and resumes playback operation.
(You may also press REC to stop recording if you prefer to control it manually).
RED
Status light turns OFF and Green Status will turn ON.
This
Automatic Start / Stop:
. Feature on SX8500 allows you to
just start the
audio and walk away
,
no need to watch the unit for end of recording.
The device automatically starts it’s normal playback, and will play what you just
recorded repeatedly. If you need to re-record repeat the above steps.
AUDIO IN
Audio source
PC, CD player...
P6
MIC
IN
BANK
1 2
REC
A B C 1 2 3
P7
Optional upgrade for
user recordings
