Pairing BlueSwitch to a Bluetooth Device
5
1)
Turn on BlueSwitch.
2)
On your phone/tablet/computer, navigate to the device’s
Bluetooth settings. Ensure your device’s Bluetooth is turned on.
3)
In your device’s settings, scan for available Bluetooth devices.
Look for a device named “BlueSwitch” and select it.
If “BlueSwitch” fails to show up as an available device,
turn your device’s Bluetooth off then back on then re-
scan for available devices.
If that doesn’t work, turn BlueSwitch off then back on
and re-scan for available Bluetooth devices on your
device.
4)
Once the connection is successful, the next Device LED on the
front of BlueSwitch will glow orange indicating it has a
Bluetooth connection and the device is currently selected as
the output device.
DIP Switch Settings
6
The four DIP switches on the right side of BlueSwitch provide basic
configurations without the need to use the free BlueSwitch Android
app. This section describes the functionality of BlueSwitch depending
on the status of each individual DIP switch. Each DIP switch is
numbered above it, starting with ‘1’ closest to the On/Off switch. The
DIP switches are considered ‘off’ when slid downward towards the
back of BlueSwitch and ‘on’ when slid upward towards the front of
BlueSwitch.
DIP Switch 1: When 'off', BlueSwitch is in standard mode, which
enables the options controlled by the next three DIP switches. When
'on' BlueSwitch is in custom mode, which disables the functionality of
DIP switches 2, 3, and 4 and instead uses the switch settings from our
free BlueSwitch Android app available on Google Play.
DIP Switch 2: When 'off', BlueSwitch sends the numbers '1' and '3' via
Bluetooth. When 'on', BlueSwitch sends 'space' and 'enter' via
Bluetooth. These are common characters used for Bluetooth switch
access.
DIP Switch 3: When 'off', a switch activation is sent via Bluetooth when
the user’s SW1 is pressed. When ‘on’, a switch activation is sent when
the user’s SW1 is released.
DIP Switch 4: When 'off', a switch activation is sent via Bluetooth when
user’s SW2 is pressed. When 'on', a switch activation is sent when
user’s SW2 is released.