INVOLAR Corporation, Ltd.
Manual version 1.12
INVOLAR Corporation Ltd. Mar. 2016
10
WARNING
Do not use fuseswhich are not approved by the manufacturer.
They should be of same type and rating value as specified
Only competent personsshould replace the fuse.
AC fuse (F2,F3)
Littelfuse
215; AC 250V, 3.15A, 5×20mm, rated
breaking capacity: 1500A
WARNING
Risk of electric shock – Both A.C. and D.C. voltage sources are
terminated inside this device. Each circuit must be individually
disconnected before servicing.
WARNING
Hot surfaces – To reduce the risk of burns – Do not touch device
surface when the device is running.
Allow 30 minutes cooling down period after switch off before
handling the device.
WARNING
Risk of electric shock from energy stored in capacitor! Do not
remove cover until 45 minutes after disconnecting all sources of
supply.
WARNING
The printed circuit boards contain components sensitive to
electrostatic discharge. Wear a grounding wrist band when
handling the boards. Do not touch the boards unnecessarily.
WARNING
Do not operate device if found to be damaged or lacking parts.
WARNING
Before installing the unit, obtain approval from the utility
company.
WARNING
Ensure adequate spacing distances between the unit and other
equipment or structures.Ensure that air can pass freely around the
unit for heat dissipation and maintenance accessibility.