inVoca
User Guide - Page 9
"macro" is simply a sequence of multiple button presses
initiated with one command (See "Macros Explained," page 2).
For example:
[TV/CD]
ÿ
[1]
ÿ
[7]
tells
inVoca
to switch into TV mode, then turns the TV to
channel 17.
[TV/CD]
ÿ
[0]
ÿ
[3]
ÿ
[VCR/DVD]
ÿ
[PLAY]
tells the TV to switch to channel 3, then instructs the VCR to
start playing a tape.
As you will see, the user-friendly
inVoca
set-up combines
training commands and macros into one simple operation.
(Page 12)
inVoca
User Guide - Page 10
1. Set up
inVoca
For Your
Entertainment System (TV, VCR etc.)
Before using the
inVoca
you will need to install four new AA alkaline
batteries (see page 61), then set it up for the entertainment
components you wish to control, such as your TV, VCR, and Cable
or DSS box.
1.
[TV/CD]
,
[CBL/SAT]
,
[VCR/DVD]
, or
[Audio/Aux]
Press the device button for the device you
wish to program. The LED will flash red
once. The LCD display will show the
device selected.
Pressing the device button a second time
will select the alternative device for that
button. (Press
[TV/CD]
once to select TV.
Press
[TV/CD]
again to select CD.)
The device selected will switch between the
two alternative selections each time you
press the device button. For example,
pressing
[TV/CD]
a third time will select
TV again.
2.
[PROG]
Press the
[PROG]
button.
The LED will flash red twice. The word
“Program” will show on the second line of
the LCD Display with a flashing cursor.
LCD
Display:
3.
[1]
ÿ
[2]
ÿ
[3]
Type in the 3-digit code for your TV, VCR,
etc. The codes can be found in the Code
List section beginning at page 62. The LED
will flash red once for each digit pressed.
The digits will be displayed as they are
entered.
TV
Program_