Inverto Onebox Essential 3650s, User Manual

Page: 7 / 66

En
3
DISCLaImeR
Information in this document is subject to change without notice. Inverto Digital Labs does not make any
representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document
and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special,
incidental, consequential, or other damage.
SaFeTy pReCauTIonS
This digital video receiver has been manufactured in accordance with international safety standards. For your own
safety, you should read the notes on safety precautions carefully, and take note of them, before operating your new
receiver. For your own safety, please be sure to follow these safety precautions.
This product is for indoor use in moderate climates only. •
This product contains no user serviceable parts. The unit should only be opened or repaired by qualified •
service personnel.
The supplied AC power cable must be used to power this product. If the power cord becomes damaged, it •
must be replaced. Always refer to qualified personnel.
Check to make sure operating voltage of the product is identical with your local power supply, prior to •
connecting it to the power socket.
To prevent fire or shock hazard: •
- Do not expose the apparatus to dripping or splashing.
- Do not place objects filled with liquids, such as vases, on the apparatus.
Install the product so the AC power cable can be unplugged from power socket immediately, in the event of a •
problem.
The unit should not be placed near sources of open flame. No open flame sources, such as candles, should •
be placed on the unit.
Should any solid object or liquid fall into the cabinet, unplug the product and have it checked by qualified •
personnel before operating it any further.
Proper grounding: For protection from lightning and static discharge the antenna connected to this receiver •
must be connected to earth ground. The proper grounding can be achieved by connection to the earth
ground system of your house/building, or by a qualified installer.
VenTILaTIon
Do not expose the product to high temperatures, such as placing it on top of other product that produce heat •
or in places exposed to direct sunlight or spot lights.
The ventilation slots on top of the product must be left uncovered to allow proper airflow into the unit. Do not •
stand the product on soft furnishings or carpets. Do not stack electronic equipments on top of the product.
Do not place the product in a location subject to extreme changes in temperature. The temperature gradient •
should be less than 10 degrees C/hour.
Place the product in a location with adequate ventilation to prevent the build-up of heat inside the product. •
The minimum ventilation space around the unit should be 7 cm. The ventilation should not be impeded by
covering the ventilation openings with items, such as newspapers, table cloth, curtains, etc.
poWeR SouRCeS
The product is not disconnected from the AC power source (mains) as long as it is connected to the power •
outlet or wall socket, even if the product is turned off.
If the product will not be used for a long period of time, disconnect it from the AC power outlet or wall socket. •