Inverto Onebox Essential 3650s, User Manual

Page: 16 / 66

12
3. Select Frequency using the ▲▼ buttons and press the OK button to view the Frequency list. Select
the frequency using the ▲▼ buttons and press the OK button. Motorized Dish Setting menu indicates the
selected frequency.
4. Select the DiSEqC motor and set the motor to DiSEqC 1.2 or DiSEqC 1.3 (USALS) by using the ◄►
buttons. For DiSEqC 1.2, the following sub menu will be displayed:
Move the dish position in the direction of the required satellite. It will stop automatically when signal on the set
frequency is received. Monitor the Signal level and quality with the corresponding bars.
5. Press the OK button on the Store Position menu. Current position of the motor is stored according to the
selected satellite.
6. Press the Red button to set a limit for the antenna movement.
Hint: Use the Dish Settings menu in order to add a new satellite.
Use the Manual Search menu to add a new frequency to a listed satellite.
When the motor is set to USALS (also known as DiSEqC 1.3) in the Dish Settings menu:
Press the Green key to set your location.
In the USALS menu set your Antenna Longitude using the number keys: Use the ◄► buttons to toggle between
East and West. Enter your Antenna Latitude: Use the ◄► buttons to toggle between North and South (this will
normally need to be set to North, helpful information can be found at www.dishpointer.com).
Consult the user manual supplied with your DiSEqC/USALS motor for additional information.
4. InSTaLLaTIon - CHanneL SeaRCH
After finishing the Dish and Motorized Dish Setting, perform an automatic channel search using the Blue button.
Through this function, the receiver searches and stores all available channels. The Channel search tools are also
accessible from the Main Menu:
1. Press the MENU button to enter the Main Menu and then select Auto Search, Blind Scan or Manual
Search and then press OK to confirm your selection.