Inverto IDLV-3440DM, User Manual

Page: 25 / 36

En
21
Gigabit Input:
Note the Column and Row FEC UDP ports have to be configured if Pro-MPEG protocol is used in the IP signal
inputted.
Uni/Multicast IP Address: Set the multicast address for the incoming IP streaming. To receive a unicast streaming,
the submenu can be ignored.
Uni/Multicast UDP Port: Set the port number for the incoming IP streaming.
TS Clock Recover:
Auto: It is suggested to set Auto when there is accurate PCR carried by the inputted TS/IP
Fixed Rate: When fixed rate is selected, user has to configure a bit rate to regenerate the TS clock. The configured
fixed bit rate has to be a higher than the bit rate of the inputted TS/IP.
Gigabit Local:
Gigabit Address: Set the IP address of the IP port
Gigabit Subnet Mask: Set the net mask of the IP port
Gigabit MAC Address: Display the MAC address of the IP port, cannot be modified by user
Gigabit Gateway: Set the gateway address under which the IP port is connected
Gateway MAC Address: Set the MAC address of the gateway under which the device is connected, this is
necessary when the IP streaming is needed to pass through the gateways