background image

4

Overview

IDLV-3440DM integrates 4 DVB Receiver and Transmodulator in one 1U 19” chassis. It provides operators an ideal 

DTV headend setup solution by combining multi-channel receiving, descrambling, remultiplexing and DVB QAM/

COFDM modulation and TS over IP operations together in one single unit. Equipped with 4 independent tuner front 

ends with various factory options for DVB-T/T2, DVB-S2/S, DVB-C, DTMB, ISDB-T and ATSC types, standard ASI 

and TS/IP I/O interfaces, IDLV-3440DM ensures compatibility with all types of transmission media. 

The standard four PCMCIA common interface slots on the rear panel support the most popular CI CAMs in the 

market to de-crypt multiple pay TV services. Being a highly integrated, compact size device offering wide flexibility 

in system configuration and reliable functionality, makes the IDLV-3440DM one of the most competitive product in 

the head-end market.

CHARACTERISTICS

• 

4x Tuner Input, Supports variety of input options DVB-T2/T/S2/S/C/DTMB/ATSC/ISDB-T) 

•  Supports DVB-S2 Input Stream Identifier (ISI, optional) and DVB-T2 Multi PLP and SFN MIP pass through 

• 

4 x DVB QAM/COFDM Modulation, 4 x RF Channel Output (Adjacent channel) 

• 

Built-in TS re-multiplexer receives from ASI, CI Slot1 to CI Slot4 and TS/IP inputs  

• 

4×DVB-CI Slots, multi-program decryption, BISS-1 and BISS-E decryption  

• 

ASI output the transport stream from CI Slot1 to CI Slot4 or BISS decryption

• 

1xchannel full duplex TS over IP or 5xchannels IP out without IP input  

• 

Remote Control and Monitoring by SNMP v2, HTTP WEB and Proprietary PC software

• 

On Site software update through IP or USB

• 

RSSI, received signal strength, Eb/N0, C/N and BER monitoring

• 

Redundant power supply

BLOCK DIAGRAM

The diagram below shows a top level architecture and functional block diagram of the IDLV-3440DM Platform:

 

Summary of Contents for IDLV-3440DM





































Reviews: