Inverto IDL 7000m TCX, User Manual

Page: 7 / 125

6
In case your TV set is equipped only
with a CVBS input socket, you can use
the CVBS output on the digital receiver
and connect your TV set via cable to
provide optimum quality of the video
signal. To provide audio signal to the TV
set it is necessary to connect the Audio
L/R output on the digital receiver with the
audio input on your TV set. In addition,
use an RF antenna (coaxial) cable to
connect the “RF OUT“ on the modulator
with the antenna input socket of the TV
set. In this way, the terrestrial antenna
connection is looped through the receiver
to the TV set (see picture 7).
1.1.3. Connection to a DVD or
video recorder
Just as the TV set, the DVD or video recorder is
connected to the receiver via a SCART connection.
Use the VCR SCART socket for this purpose (see
picture 8).
If you also have a video recorder connected to the
terrestrial antenna cable, this terrestrial antenna
connection should run first from the receiver to the
video recorder and only from there to the TV set.
As in a case the audio and video signals have to be
modulated for high-frequency transmission on a UHF
channel, signal quality is not as good compared to a
connection with a SCART cable.
1.1.4. Connection to a Hi-Fi system
The audio quality of digital TV and radio programmes
can be enjoyed even more when reproduced through a
Hi-Fi system. To do this, use a RCA cinch stereo cable
to connect the sockets marked Audio L/R on the receiver
to one of the inputs of your Hi-Fi system marked either
Line, Aux, Spare or Extra (see picture 9).
Picture 7
Picture 8
Picture 9