18
4.1.6.2. Finding and storing the channels
Press the “Red” function key (8), to start automatic tuning (channel search).
The progress bar will show the progress of the scanning. The “Found
channels” screen will show a list of the channels found, with the number and
type of the channel (TV or Radio). You may press the “Exit” key (22), during
the scanning process to stop and use the channels that have already been
found.
After the channel search is finished, or stopped by the user, the search
results will be displayed. Here user can see how many “Free to air” and
“Encrypted”, TV and Radio programmes have been found. In addition, the
user can see how many of them are new (see picture 22).
Press the “Green” function key (9), to save the new channels into the main
TV and Radio lists. If you do not want to update the main TV and radio lists,
press the “Red” function key (8). If you selected “Replace services”, all of
the services in the main and favourite lists will be replaced.
4.1.6.3. Manual tune
In “Manual tune” there are up to six options you can set before starting
manual tuning (see picture 23). Here, the user can see the signal strength
and signal quality for the selected tuner with the selected parameters.
4.1.6.3.1. Tuner
Use this option to select the tuner on which the search will be done. Press
the “OK” key (6) and select one of the tuner options with the navigation key
“Up” and “Down”. At the end, press the “OK” key (6) to confirm.
4.1.6.3.2. Channel
Use this option to set the channel on which the search will be done. Press
the “OK” key (6) and use the numeric keys on your remote control to enter
the number of the channel from 5 to 12 and from 21 to 69. At the end, press
the “OK” key (6) to confirm. When you change the channel, the frequency
value will be automatically adjusted to the correct frequency.
4.1.6.3.3. Frequency
Use this option to manually set the frequency on which the search will be
done. Press “OK” key (6) and use the numeric keys on your remote control
to enter a frequency from 174000 kHz to 230000 kHz or from 470000 kHz to
862000 kHz. At the end, press “OK” key (6) to confirm.
4.1.6.3.4. Auto Mode
This mode will auto-detect the FFT mode and Guard Interval parameters Press the “OK” key (6) and select one of the options with
the navigation key “Up” and “Down”. At the end, press the “OK” key (6) to confirm selection. If the option “Yes” is selected, options
“FFT Mode” and “Guard Interval” will be disabled.
4.1.6.3.5. FFT Mode
This option is available only if “Auto Mode” is set to “No”. Use this option to set FFT mode. Press the “OK” key (6) and select one of
the options with the navigation keys “Up” and “Down”. At the end, press the “OK” key (6) to confirm selection.
4.1.6.3.6. Guard Interval
This option is available only if “Auto Mode” is set to “No”. Use this option to set the guard interval. Press the “OK” key (6) and select
one of the options with the navigation keys “Up” and “Down”. At the end, press the “OK” key (6) to confirm selection.
Picture 21
Picture 22
Picture 23
Summary of Contents for IDL 7000m TCX
Page 2: ...1 En IDL7000M TCX User Manual Language English Suomi Swedesh Page 2 44 84...
Page 44: ...Fi...
Page 84: ...83 Fi...
Page 85: ...Sv...
