Optidrive ODP-2ETHEG-IN User Guide Revisions 1.00
8
www.invertekdrives.com
4
El
ect
ri
cal
In
st
al
la
tion
4.
Electrical Installation
4.1.
Overview
The OPT-2-ETHEG-IN is intended for operation with one of the following Invertek Drives‘ products
Optidrive E3
Optidrive P2
Optidrive Eco
The unit connects via an RJ45 cable, which also supplies the power to the OPT-2-ETHEG-IN from the 24 Volt output of the Optidrive.
4.2.
Connection Diagram
Optional Drive Keypad
OPT-2-OPORT-IN
OPT-2-OPPAD-IN
RJ45 Cable
Maximum Length: 3 Metres
RJ45 Cable
Maximum Length: 20 metres
Optidrive
OPT-ETHEG-IN
Ethernet IP Network
Ethernet IP Network
4.3.
Grounding
For correct operation, ensure the Ground tab is connected to the control cabinet Ground point. Do not connect to the drive ground connection
point.
