User Manual Lumen and inverSOL 5000
www.inversolpr.com
29
Setting
Solar Power
Priority
Output Source
Priority
Charger
Source Priority
Input Voltage
Range
AC Output
Voltage
AC Output
Frequency
Options
Battery -> Load: Solar energy provides power to charge the
battery first, then powers the load
Load -> Battery: Solar energy provides power to the household
load first, then charges the battery
Utility Second: If the solar energy is not sufficient to power
connected loads, utility energy will supply power at the same time
Battery Second: If the solar energy is not sufficient to power
connected loads, battery energy will supply power at the same
time. If the battery and the solar are insufficient, utility power will
then power the loads as well.
Solar and Utility: Solar and utility energy will charge the battery at
the same time.
Solar First: Solar energy will charge the battery as first priority.
Utility will only charge when solar energy is insufficient.
Solar Only: Only solar energy will charge the battery, whether or
not there is grid energy available.
Appliance: Voltage range will be between 65-140 Volts for AC
power
UPS: Voltage range will be between 85-140 Volts for AC power
120 V: Range will 106-132 Volts
110 V: Range will be 97-121 Volts
101 V: Range will be 89-111 Volts
60 Hz: Range will be 57.5-61.5 Hz
50 Hz: Range will be 47.5-51.5 Hz
Default
Battery -> Load
Solar First, Utility
Second
Solar and Utility
Appliance
120 V
60 Hz
Description
Determines what solar
energy provide power to as
first priority
Determines what the
household load draws from
second when the power
provided by the solar
energy is insufficient
Determines what will
charge the battery
Determines the acceptable
AC input voltage range
Determines the acceptable
feed-in range for the grid
voltage
Determines the acceptable
feed-in range for the grid
frequency
Table 6. Administrator Settings
User Interface Overview
