inveo RFID-MB-10, User Manual

Page: 7 / 13

5 Device Configuration
After installing RFID Config configuration and run it, connect the USB cable to the computer and
the module (in this case, an external power supply module is not required - the device is fed through
the USB port).
Drawing 1. Aplication window.
5.1 OUT mode
Mode – Set the output mode , selected from:

Static – bistable mode

Toggle – momentary mode – alternately turning on and off

1-Pulse – release the output causes it activation for time Time ON and after it will switch
off.
Charts work shown in the figure below:
Static mode
t
on
t
off
t
on
t
off
t
on
t
off
t
on