4
Wake from Shutdown Mode
To exit Shutdown Mode, apply battery charge voltage pulse to the positive and negative termi-
nals for >1 second.
Note:
Many intelligent chargers sense voltage at the battery terminals prior to applying charge
voltage and thus will not wake the battery from Shutdown Mode. In this case, it is recommend-
ed to use a power supply set to the appropriate charge voltage to wake the battery from Shut-
down Mode.
14.4V for 1s
28.0V for 1s
M-12V40-U1
M-24V20-U1
TO
WAKE UP
THE BATTERY
FROM SHIP MODE
TO PLACE IN
SHIP MODE
We recommend to place the battery
in Ship Mode when it is not used to
prevent self-consumption current
drain and extend storage life.
Press the SOC button
for
5 seconds
Press the SOC button
for
20 seconds
Wake-Up & Ship Mode
Battery can also receive a wake up signal from
the signal connector by shorting pin 6 (VGND)
to pin 4 (VINTLK) to wake up battery from
Ship Mode.
Wake-Up
Connect pins 4 & 6
to exit Ship Mode
1
2 3
4 5
6
7 8
