appliance description
2
before first use
3
Before you use the appliance for the first time, please do
as follows: Carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation. Place
the mixer on a flat and stable surface. Rinse all the accessories
- glass jug, knives and lid - with warm soapy water and dry them
thoroughly. Wipe the base with a damp cloth. Always roll out the
cord completely.
When the mixer is in use, the ingredients will be transported
along the sides of the jug to the top and will come down through
the middle. This system guarantees that even ice cubes will be
completely crushed.
A plastic lock ring is connected at the bottom of the jug. This
ensures the jug to stand stable on a flat surface. Make sure that
all the parts are dry before you use the appliance.
• Place the mixer on a flat and stable surface as soon as you
have rolled out the cord. Practice a few times to disassemble
and assemble the mixer without any ingredients.
• The middle of the lid has a cap which can be used as a
measuringcup and for adding ingredients. Through the
opening in the lid you can gradually add ingredients.
• The base contains the motor. Because of it’s size, the housing
is very stable.
• The control knob regulates the speed of the mixer. The mixer
has 2 speeds and a pulse (ice crush) setting.
- setting P = pulse
- setting O = off
- setting 1 = lowest speed
- setting 2 = highest speed
• The mixer can crush ice cubes with the pulse setting. This
means that the mixer is only activated when you turn the
knob to the pulse setting. As soon as you let go of the button
the mixer will be deactivated.
10
•
English
1. Cap
2. Lid
3. Jug (capacity 1 liter)
4. Control knob with speed settings
5. Base
NB500R
6. Inner plastic ring
7. Knives
8. O-ring
9. Outer plastic ring
6
7
8 + 9
4
2
1
3
5
1. Cap
2. Lid
3. Jug (capacity 1,5 liter)
4. Control knob with speed settings
5. Base
4
2
1
3
5
NB600R
6
7
8
6. Knives
7. O-ring
8. Outer plastic ring
NB500-instructions.indd 10
15-12-2014 12:27:09
