Procedure
1. Remove the grease filter.
2. Push the lamp holder (B) down from the inside.
3. Carefully turn the defective lamp (A) clockwise out of the holder.
4. Replace the lamp with a new one.
5. Turn the new lamp counterclockwise into the holder.
6. The lamp holder will spring back in position by itself. If this doesn't happen, carefully bend the holder back in
position.
7. Install the grease filter.
8. Repeat the steps for the second lamp.
7
Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table.
2. If you cannot find a solution for the problem, contact the Inventum-servicedienst.
TROUBLESHOOTING TABLE
Problem
Possible cause
Possible solution
The motor does not operate.
The mains plug is not connected.
Connect the mains plug.
There is no mains supply.
• Do a check if the mains plug is
correctly connected to the mains
socket.
• Make sure that the mains supply
is on.
There is a problem with the fuse.
Do a check on the fuse box.
The appliance does not operate
correctly or makes an unusual
sound.
The dimension of the outlet is not
correct.
Make sure that you use the correct
dimension during installation. Refer
The outlet has a blockage.
Remove the blockage.
The grease filter is dirty.
Clean the grease filter. Refer to
section
The carbon filter is worn.
Replace the carbon filter. Refer to
section
8
Technical data
TECHNICAL SPECIFICATIONS OF THE COOKER HOOD
Item
Specification
Energy efficiency class
D
Air flow rate (at min/max speed) [m3/h]
212/350
Lighting efficiency class
A
Grease filtering efficiency class
D
Noise level at min/max speed [dB]
55/65
Color
Black
(Figure 15)
English
•
33
