INVENTOR M2GHP290-12, User Manual

Page: 17 / 64

17
SCALE 0.500
SCALE 0.500
Remove the air filter
Upper filter
(take out)
Remove the
screw,then
take the lower
filter out.
MODEL A
MODEL B
MODEL A MODEL B
MODEL A
MODEL B
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
SCALE 0.500
Remove the
upper drain plug
√
Continuous
drain hose
Remove the
upper drain plug
√
Continuous
drain hose
Uper air filter
(take out)
Lower air filter
(take out)
SCALE 0.500
SCALE 0.500
SCALE 0.500
X
drain hose
adaptor
Press the power
cord buckle into
the rear cover.
drain hose
adaptor
√
delivery lift <1.8m
WAIT 3 MINUTES BEFORE RESUMING OPERATION
Once the unit has stopped its operation, it can not be
restarted within the first 3 minutes, for the protection
of the device. Operation will automatically restart after
3 minutes.
POWER MANAGEMENT feature
When the ambient temperature is lower than the
setting temperature for a period of time, the unit
will be automatically operate power management
feature. The compressor and fan motor stop. When
the ambient temperature is higher than the setting
temperature, the unit will be automatically quit the
power management feature. The compressor and (or)
fan motor run.
NOTE: For unit with power management light, the
light will illuminate under this feature.
Water drainage
- When under dehumidifying mode, remove the
drain plug for the back of the unit and install the drain
connector (5/8 universal female mender) with a 3/4
hose (may be purchased locally). For models without
the drain connector, please attach the drain hose to
the outlet, while placing the other side of the hose
directly over the drainage port of your basement floor.
During heating pump mode, remove the lower
drain plug from the back of the unit, install the drain
connector(5/8" universal female mender) with 3/4"
hose(locally purchased). For the models without drain
connector, just attach the drain hose to the hole. Place
the open end of the Hose adaptor directly over the
drain area in your basement floor.
NOTE: Βe certain the hose is secure without any
leaking. Direct the hose toward the drain, in such a
manner that there are no breaks or bents securing
smooth water flow. (See Figs with
R
. Do never let it up.
(See Figs with
S
). When the continuous drain hose is
not of use, ensure the drain plug is installed firmly to
prevent possible leakage.
- When the water level of the bottom tray reaches a
predetermined level, the unit beeps 8 times; the digital
display area shows “PI”. At this time
the air conditioning/dehumidification
process will immediately stop.
However, the fan motor will continue to
operate (this is normal). Carefully move
the unit to a drain location, remove the
bottom drain plug and let the water
drain . Re- install the bottom drain plug and restart the
machine until the “PI” symbol disappears. If the error
persists, please call for service.
NOTE: Be sure to reinstall the bottom drain plug
firmly to prevent leakage before using the unit.
| Maintenance
WARNING:
- Be sure to unplug the unit before cleaning or
servicing
- DO NOT use flammable liquids or chemicals to
clean the unit.
- Do not wash the unit directly under a tap or
using a hose as it may cause electrical shock.
- DO NOT operate this unit if the power cable
is damaged in any way. If the power cord is
damaged it must be replaced from the product
manufacturer and never repaired.
Clean the Air Filter
CAUTION
DO NOT operate the unit without filter because
dirt and lint will clog it and reduce performance.
|Operation
SCALE 0.500
SCALE 0.500
Remove the air filter
Upper filter
(take out)
Remove the
screw,then
take the lower
filter out.
MODEL A MODEL B
MODEL A MODEL B
MODEL A MODEL B
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
SCALE 0.500
Remove the
upper drain plug
√
Continuous
drain hose
Remove the
upper drain plug
√
Continuous
drain hose
Uper air filter
(take out)
Lower air filter
(take out)
SCALE 0.500
SCALE 0.500
SCALE 0.500
X
drain hose
adaptor
Press the power
cord buckle into
the rear cover.
drain hose
adaptor
√
delivery lift <1.8m
SCALE 0.500
SCALE 0.500
Remove the air filter
Upper filter
(take out)
Remove the
screw,then
take the lower
filter out.
MODEL A
MODEL B
MODEL A
MODEL B
MODEL A MODEL B
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
SCALE 0.500
Remove the
upper drain plug
√
Continuous
drain hose
Remove the
upper drain plug
√
Continuous
drain hose
Uper air filter
(take out)
Lower air filter
(take out)
SCALE 0.500
SCALE 0.500
SCALE 0.500
X
drain hose
adaptor
Press the power
cord buckle into
the rear cover.
drain hose
adaptor
√
delivery lift <1.8m
SCALE 0.500
SCALE 0.500
Remove the air filter
Upper filter
(take out)
Remove the
screw,then
take the lower
filter out.
MODEL A MODEL B
MODEL A MODEL B
MODEL A MODEL B
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
√
drain hose
adaptor
Continuous
drain hose
Remove the
lower drain plug
SCALE 0.500
Remove the
upper drain plug
√
Continuous
drain hose
Remove the
upper drain plug
√
Continuous
drain hose
Uper air filter
(take out)
Lower air filter
(take out)
SCALE 0.500
SCALE 0.500
SCALE 0.500
X
drain hose
adaptor
Press the power
cord buckle into
the rear cover.
drain hose
adaptor
√
delivery lift <1.8m