INVENTOR LV4MDI-07, User & Installation Manual

Page: 9 / 104

7
Fig 3-3
CN40
Slots
3. INSTALLATION METHOD
3.Wiring figure
• Connect the female joint of wires group from the mainboard with the male joint of
connective wires group. (See Fig.3-3)
• Please connect the other side of connective wires group with the male joint of
wires group leads from wire controller. (See Fig.3-3)
4.Remove the upper part of wire controller
• Insert a slot screwdriver into the slots in the lower part of the wire controller (2 places),
and remove the upper part of the wire controller. (Fig.3-4)
NOTICE
The PCB is mounted in the upper
part of the wire controller. Be
careful not to damage the board
with the slot screwdriver.
4-core shielding wire
The connective wires group
Mainboard