INVENTOR LV4MDI-07, User & Installation Manual

Page: 23 / 104

21
9. OPERATION
Press the button to activate the auto Left-right swing feature of the louver.
And then the louver would swing automatically. Press it again to stop.
When the auto Left-right swing feature of the louver is activated, the mark appears.
(Not applicable to all the models)
Faceplate function (on some models)
1. When the unit is off, Press the Mode(A/B) button long to activate the
faceplate function.The mark will flash.
Mode A/B
The F2 mark appears when
the faceplate is adjusted.
2. Push the Mode(A/B) button to select Unit A or Unit B, the wire controller se-
lect in a sequence that goes from(this step do not need to perform if the wire
controller is connected with one unit only):
3. Press the button “+”and to control the lift and drop of the faceplate.
Pressing the “+” button can stop the face plate, while it is dropping.
Pressing the button can stop the faceplate, while it is lifting.
A B
Left-right airflow swing (on some models)