INVENTOR DRVI32-09WF, User Manual

Page: 8 / 36

Operation
HEALTH AIRFLOW Operation
FAN MODE Operation
The setting of
function
FAN
MODE
Fan mode: default low fan speed,fan
mode , the setting temperature will
not display, the temperature of indoor
display is 24
℃
appears on the display. Avoid
the body.
TIMER
TIMER
again, appears on the display.
direct to the body.
FAN MODE
FAN MODE
The cancel of
function
and outlet grills of the air conditioner are opened, and
the unit goes on working under the condition before the
grille will close automatically.
Notice:
Cannot pull direct the outlet grille by hand. Otherwise, the
grille will run incorrectly. If the grille is not run correctly,
stop for a minute and then start, adjusting by remote
controller.
Remote controller can memorize each operation status.
when starting it next time, just press ON/OFF button and
unit will run in previous status.
Note:
mode.
mode.
5
2. In heating, it is better to select the
3. In cooling, it is better to select the
4. In cooling and dry, using the air conditioner for a
long time under the high air humidity, a phenomenon
falling drips of water occurs at the outlet grille.
5. Select the appropriate fan direction according to the
actual conditions.