INVENTOR DRVI32-09WF, User Manual

Page: 11 / 36

Operation
HEALTH Operation
ON/OFF operation and test operation
.
ON/OFF Operation:
Use this operation only when the remote controller is
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
“Pi” sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
Pi
The water-ion generator in the
airconditioner can generate a lot
of anion effectively balance the
quantity of position and anion in
the air and also to kill bacteria
and speed up the dust sediment
air in the room.
Room Designated Timer Fan Operation
temperature temperature mode speed mode
Above 24 ºC 24 ºC No AUTO COOL
Below 24 ºC 24 ºC No AUTO HEAT
Press HEALTH
button
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
FAN MODE
Test operation:
T
est operation switch is the same as emergency switch.
Use this switch in the test operation
For each press, is displayed
Air conditioner starts health anion
function operation.
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the “Pi” sound twice,
Pi Pi
Loading of the battery
Press HEALTH button for twice press,
disappears, the operation stops.
1
Remove the battery cover;
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the “+”/“-”;
Load the battery, then put on the cover again.
2
When indoor fan motor is running, it has healthy
process function. (It’s available under any mode)
When the fan in the indoor unit does not work, the
health lamp lights up, but the anion generator does
not release anion.
3