Inventor Air Conditioners RISE 8Lt, User Manual

Page: 28 / 48

11
1. Beeper alarms responds by 3 times when turn the unit
on
2. LED monitor defines corresponding functions and
status
l
Press Fan:
Select Quiet (L), normal dehumidification (M) and faster dry (H)
and circulate above functions.
1. Continuous appeared to set humidity
ratio in the room
2. L (Quiet dehumidification) setting.
3. M (Normal dehumidification) setting.
4. H (Faster dry) setting. Under this
circumstance, humidity ratio could
not be set.
5. LED pilot lamp lighted on to respond
functioning status.
Press Mode:
Setting the operating mode among High-Normal-Eco-Turbo,
and circulative.
1. High mode(the target humidity is
40%Rh): Humidistat detected room
RH is lower
≦
38%, the unit
automatically turned itself off, the icon
of dehumidification on LED goes off.
Normal mode (50%Rh target) & Eco
mode
（
60%Rh target) setting are
similar to above.
2. Turbo mode: Continuously drain
setting.
l
Press Swing:
When the unit is set on L / M /H, flapping air guide will change
the angle between 90 to 45 degree. Press again, air guide stop
at the existing angle.
1. LED blinks, air guide moves the between 90 to 45
degree.