Inventec M215T, Manual

Page: 8 / 19

M215T
8
Warning To prevent electric shock, Do not remove cover.
No user serviceable parts inside, refer servicing to qualified personnel.
Attention Pour éviter tout choc électrique, ne pas retirer le couvercle.
L'intérieur ne contient pas de composants, se reporter l'entretien à du
personnel qualifié.
Warning Do not modify this equipment without authorization of the
manufacturer.
Attention Ne pas modifier cet équipement sans autorisation du fabricant.
10. Grounding reliability can only be achieved when the equipment is connected to an equivalent
receptacle marked “Hospital Only” or “Hospital Grade”.
11. se a power cord that matches the voltage of the power outlet, which has been approved and complies
with the safety standard of your particular country if use of incorrect power cord may present a risk of
fire.
Use U.S.A and Canada power supply cord information as below
The power cord length not longer than 3m.
Accessory equipment connected to the analog and digital interfaces must be in compliance with the
respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing equipment, IEC 60065
for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations shall comply with the system standard IEC 60601-1-1. Everybody who
connects additional equipment to the signal input part or signal output part configures a medical system,
and is therefore, responsible that the system complies with the requirements of the system standard IEC
60601-1-1. The unit is for exclusive interconnection with IEC 60601-1 certified equipment in the patient
environment and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult
the technical services department or your local representative.
Note! Environmental protection
Follow national requirements to dispose of unit.