Inventec B900G3, Manual

Page: 34 / 61

Hardware Operations
2015-MNU-000006
2-4
2.4 Processor
This motherboard supports dual Intel
®
Xeon™ E5-2600 series processors.
The location of processors on the motherboard is shown below:
Figure 2-5 Location of Processors
Processor 0
Processor 1
2.4.1 To remove the heat sink
Loosen the securing screws.
Lift the heat sink up from the installed processor.
Figure 2-6 Removing the Heat Sink
2.4.2 To install the heat sink
Reverse the steps above to install the heat sink.
Before you put the heat sink on top of the installed processor, please do not forget
to check if the grease is complete on bottom of the heat sink.
The heat sink used in the figure below is just for your reference. Please choose an
appropriate heat sink depending on the whole system requirement.