InMode Without Vasculaze Operator Manual
Section 4: Device Description
31 of 96
Standby mode
allows the user to set treatment parameters.
Activation of energy is not allowed in Standby mode.
In
Ready mode
, the system is waiting for a signal from the
Footswitch to activate the energy. Any attempt to change
the treatment settings switches the System to Standby
mode.
When the signal from the Footswitch is indicated, the
System switches to
Active mode
. Any attempt to change the
treatment settings switches the System to Standby mode.
1.1
Sound Indicator
Periodic beeping signal is emitted, when energy is delivered.
A warning sound tone indicates Bad Coupling.
1.2
Cut-Off Temperature Control
C is constantly
o
off temperature up to an upper limit of temperature of 43
-
The cut
maintained for Forma/Plus, and BodyFX/MiniFX handpieces. When the measured
temperature approaches the Cut-off Temperature, the tone beeps double in speed. It
becomes faster when the Cut-off Temperature is reached and RF is instantly
inactivated. As soon as the temperature drops below the Cut-off temperature, RF
starts again, thus maintaining the desired temperature with safety and when
reached, RF delivery is automatically stopped. Temperature is monitored by a
temperature sensor in the Handpiece and serves as a safety feature
1.2
Handpieces
Each Diolaze and DiolazeXL Handpiece comprises an Applicator, Cable and Connector.
Figure
4
-12: Diolaze (Left) and DiolazeXL (Right) Handpiece
