InMode Without Vasculaze Operator Manual
Section 3: System Installation
19 of 96
Slowly push or pull the System using the Handle.
When moving to another facility, disconnect harness support, lift the System to
the vehicle and lay it carefully on its side.
For shipment with Diolaze, DiolazeXL and Lumecca, drain the water from the
System and the Handpieces, as described in Section 12- System Maintenance.
Never lift, pull or push the System using the operating panel.
Always use the handles when moving the System.
Upon unpacking, check the System for mechanical damage (e.g., cracks in
the Cable insulation).
Never leave the system or/and handpieces with water in, exposed to
freezing temperatures (< 4°C).
1.2
System Disposal
To comply with European Commission Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE) and other country and state regulations, please DO
NOT dispose of this equipment in any location other than designated locations.
