SECTION 4—ARMS
Part No 1143195
15
Van Seat
SECTION 4—ARMS
WARNING
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the Off position.
Adjusting Armrests
WARNING
Pinch point may occur when adjusting the arm angle position (Detail “A”).
Angle
NOTE:
For
this
procedure,
refer
to
Detail
“A”
of
FIGURE 4.1.
1. Lift
up
the
armrest.
2. Loosen
the
jam
nut.
3. Adjust
the
socket
screw
up
or
down
to
the
desired
arm
angle
position.
4. Tighten
the
jam
nut.
5. To
determine
the
same
angle
for
the
opposite
armrest,
count
the
exposed
threads
after
the
jam
nut
has
been
tightened.
6. Repeat
STEPS
1
‐
4
for
opposite
armrest,
if
necessary.
Height
NOTE:
For
this
procedure,
refer
to
Detail
“B”
of
FIGURE 4.1.
1. Remove
the
socket
screw
that
secures
the
armrest
to
the
seat
frame
assembly.
2. Adjust
the
armrest
to
one
of
four
positions.
3. Reinstall
the
socket
screw
that
secures
the
armrest
to
the
seat
frame
assembly
and
tighten
securely.
FIGURE 4.1
Adjusting Armrests
DETAIL “B” - HEIGHT
DETAIL “A” - ANGLE
Armrest
Adjustment
Screw
Armrest
Height Adjustment
Holes
Seat Frame
Assembly
Lock Knob
Jam Nut