Tracer® EXI
16
Part No. 1110547
UNFOLDING AND FOLDING THE WHEELCHAIR
WARNING
Keep hands and fingers clear of moving parts to avoid injury.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat
frame rails are fully seated into the side frame H-blocks.
Unfolding.
1. Open the wheelchair by grasping the back cane of the wheelchair closest to you.
2. Tilt the wheelchair towards you (raising the opposite wheel and caster off the ground/
floor).
3. Push downward on the TOP of the seat rail closest to you where the seat upholstery is
attached until the wheelchair is fully open.
4. Engage both wheel locks, open the footrest/legrest for clearance and transfer into the
wheelchair. Refer to TRANSFERRING TO AND FROM OTHER SEATS in this section
of the manual.
TRANSFERRING TO AND FROM OTHER SEATS
WARNING
BEFORE attempting to transfer in or
out of the wheelchair, every
precaution should be taken to reduce
the gap distance. Turn both casters
parallel to the object you are
transferring onto. Also be certain the
wheel locks are engaged to help
prevent the wheels from moving.
CAUTION
When transferring, position yourself as far back as possible in the seat. This
will help prevent broken screws, damaged upholstery and the possibility of
the wheelchair tipping forward.
NOTE: This activity may be performed independently provided you have adequate mobility and upper
body strength.
Position the wheelchair as close as possible along side the seat to which you are transferring,
with the front casters parallel to it. Remove or flip up the armrest. Engage wheel locks. Shift
body weight into seat with transfer.
During independent transfer, little or no seat platform will be beneath you. Use a transfer
board if at all possible.
SECTION 1
GENERAL GUIDELINES
GENERAL
GUIDELINES
All manuals and user guides at all-guides.com
all-guides.com
