Invacare Tracer EXI Page 23 Owner'S Operator And Maintenance Manual Download

Page: 23 / 44

Part No. 1110547

Tracer® EXI

SECTION 3

FRONT RIGGINGS

FRONT

RIGGINGS

FIGURE 3 - FOOTPLATE HEIGHT ADJUSTMENT - BOLT-IN-PLACE

HEIGHT ADJUSTMENT

6. From the outside of the swingaway front rigging, insert the riv nut through both the

front rigging support and the footplate assembly.

7. From the inside of the swingaway front rigging, insert the button head screw through

the appropreate adjustment hole and thread into the riv nut.

8. Using a screwdriver to hold the riv nut in position, securely tighten the button head

screw. Torque to 32 in-lbs.

9. Rotate cam lock lever DOWN to LOCKED position.
10. Repeat STEPS 1-8 to adjust the remaining footrest.

OUTSIDE OF

SWINGAWAY

FRONT

RIGGING

Riv Nut

INSIDE OF

SWINGAWAY

FRONT

RIGGING

Button Head Screw

Footplate

Assembly

Front Rigging

Support

Cam Lock Lever

Adjustment Hole

NOTE: Swingaway footrests shown.

Riv Nut

Button Head

Screw

Footplate Assembly

Front Rigging

Support

Adjustment

Hole

FIXED FRAME (FIGURE 4)

1. Remove impact guards and/or calf strap,

if necessary.

2. Loosen, but do not remove the bolt

and locknut that secure the lower

footrest assembly to the upper footrest

support.

3. Reposition the lower footrest assembly

to the desired height.

4. Securely tighten the bolt and locknut.
5. Repeat this procedure for the other footrest, if necessary.
6. Replace impact guards and/or calf strap, if necessary.

Bolt and

Locknut

Wheelchair

Frame

Footplate

Assembly

FIGURE 4 - FOOTPLATE HEIGHT

ADJUSTMENT - FIXED FRAME

All manuals and user guides at all-guides.com

Summary of Contents for Tracer EXI













































Search results

Summary of Contents for Tracer EXI

Reviews:

Related manuals for Tracer EXI

Brands by name

Popular brands

Invacare Tracer EXI, Owner'S Operator And Maintenance Manual

Search results

Summary of Contents for Tracer EXI

Reviews:

Related manuals for Tracer EXI

Brands by name

Popular brands