Invacare® TDX® SP2 Series
1.
On both sides, loosen and remove the upper backrest
screw
A
.
2.
Set the required backrest angle in 3.8° steps.
Use scale
B
on the backrest for this purpose. Ensure
that you set the same angle on both sides.
3.
Re-insert and tighten the screw.
Ensure you insert the screw through one of the holes
of the backrest bracket. The screw must be visible on
the inside of the bracket and the screw head must be
flush with the bracket.
Simple backrest
•
6 mm Allen key
1.
On both sides, loosen and remove the middle backrest
screw
A
.
2.
Set the required backrest angle in 7.5° steps.
Ensure that you set the same angle on both sides.
3.
Re-insert and tighten the screw.
5.9.4 Adjusting the backrest angle (Max seat)
Tools:
•
Crosstip screwdriver
1.
Remove the backrest cushion and the seat cushion.
2.
Loosen the screws (1) and remove the seat plate.
50
1578997-E
Summary of Contents for TDX SP2 NB
Page 115: ...Notes ...
