Invacare Storm 4 Series, Service Manual

Page: 90 / 102

Invacare® Storm⁴ Series
6.12.5 Replacing Seat Frame
CAUTION!
Risk of strain from lifting heavy parts!
– Use proper lifting techniques.
• 2 x 6 mm Allen key
Removing Seat Frame
1. Loosen screws A simultaneously.
2. Remove screw that becomes loose and washer B .
Screw and washer on other side remain inside
connecting rod
D .
3. Pull out connecting rod.
4. Lift off seat frame E .
Bushings
C
must remain in seat frame.
Fig. 6-117
Installing Seat Frame
1. Install parts in reverse order.
2. Test all functions.
6.12.6 Replacing Seat Support
CAUTION!
Risk of strains from lifting heavy parts!
– Use proper lifting techniques.
• TX40 Torx key
• Oblique pliers
• Cable ties
We use different types of seat supports in our mobility devices. Due to this fact the seat support and the screws on your
mobility device may look different to the illustrations below. The mounting instructions are not affected by this.
Removing Seat Support
1. Remove seat frame. See 6.12.5 Replacing Seat Frame,
page 90 .
2. Loosen and remove four screws
A
.
3. Lift off seat support
B
from seat / lifting column.
Fig. 6-118
90 1533060-N