TRANSFERRING THE PATIENT
Part No. 1145811
27
Stand Up Lift Model RPS350-2
7. Instruct
or
assist
the
patient
in
lifting
their
feet
off
the
footplate.
8. Remove
the
sling
from
around
the
patient.
9. Pull
the
stand
up
lift
away
from
the
commode.
10. When
complete,
recheck
the
sling
for
correct
attachments.
11. To
lift
the
patient
from
the
commode,
refer
to
Lifting
the
Patient
starting
on
page 21.
Transferring to a Wheelchair
NOTE:
For
this
procedure,
refer
to
FIGURE 5.2
on
page
28.
1. Ensure
the
legs
of
the
lift
with
the
patient
in
the
sling
are
in
the
open
position.
Press
the
legs
open
button
until
in
maximum
open
position.
2. Move
the
wheelchair
into
position.
Refer
to
Detail
“A”.
3. Engage
the
rear
wheel
locks
of
the
wheelchair
to
prevent
movement
of
the
chair.
Refer
to
Detail
“B”.
WARNING
DO NOT place the patient in the wheelchair if the locks are not engaged. The
wheelchair wheel locks MUST be in a locked position before lowering the patient
into the wheelchair for transport. Otherwise, injury may result.
4. Position
the
patient
over
the
wheelchair.
5. Press
the
down
arrow
button
and
lower
the
patient
into
the
wheelchair.
Refer
to
Detail
“C”.
WARNING
Lock the rear swivel casters ONLY when positioning or removing the sling (standing
or transport) from around the patient. Otherwise, injury may occur.
6. Lock
the
rear
swivel
casters.
7. Unhook
the
sling
from
all
attachment
points
on
the
stand
up
lift.
Refer
to
Detail
“D”.
8. Instruct
patient
to
lift
their
feet
off
the
footplate.
Assist
the
patient
if
necessary.
9. Remove
the
sling
from
around
the
patient.
10. Pull
the
stand
up
lift
away
from
the
wheelchair.