Usage
3.9.3
Setting the time (remotes up to July 2014)
The symbol for time (see chapter 3.10.1 Deactivating programming
mode (remotes since July 2014), page 18) is shown in the display.
1.
Press the function key
B
or move the joystick right or left to
select the individual digits in the time display.
The digit to be changed is shown blinking.
2.
Move the joystick forwards to change the individual digits in the
time display.
3.
Move the joystick to the rear to save the changed time.
4.
To carry out further settings, press the "Activate setting mode"
key
A
or move the joystick right or left again.
5.
To return to drive mode, press the "Activate drive
mode/switch-through" key
C
.
3.9.4
Display/hide time display (remotes up to July
2014)
The symbol for time display (see chapter 3.10.1 Deactivating
programming mode (remotes since July 2014), page 18) is shown
in the display.
1.
If the green symbol is shown in the display, the time display is
available.
2.
If the red symbol is shown in the display, the time display is
hidden.
3.
Press the joystick to the right or left to display or hide the time
display.
4.
If you press the joystick forwards when two ticks are displayed
above the function key
B
, the changes you have made to the
time display will be saved.
5.
If you press the joystick forwards when two crosses are displayed
above the function key
B
, the changes you have made to the
time display will not be saved.
6.
To carry out further settings, press the "Activate setting mode"
key
A
or move the joystick right or left again.
7.
To return to drive mode, press the "Activate drive
mode/switch-through" key
C
.
1528090-G
17
