Invacare® REM 550
3.9
Further adjustment options for remotes up
to July 2014
3.9.1
Deactivating programming mode (remotes up
to July 2014)
The setting options described here are standard settings. The
functions of the buttons can be allocated differently, specific to the
customer, or can be deactivated.
1.
Press the "Activate setting mode" key
A
next to the P symbol.
2.
Press the function key
B
or move the joystick right or left until
the required adjustment option is shown in the display.
3.
Press the joystick forward to confirm the required adjustment
option.
You can change the following settings:
Screen brightness
Time
Clock display
Screen background
3.9.2
Changing the screen brightness (remotes up
to July 2014)
The symbol for screen brightness (see chapter 3.10.1 Deactivating
programming mode (remotes since July 2014), page 18) is shown
in the display.
1.
Press the function key
B
or move the joystick right or left to
change the screen brightness.
The bar underneath the sun symbol shows the adjusted value.
2.
Press the "Activate setting mode" key
A
or move the joystick
right or left to confirm the required setting options.
3.
To carry out further settings, press the "Activate setting mode"
key
A
or move the joystick right or left again.
4.
To return to drive mode, press the "Activate drive
mode/switch-through" key
C
.
16
1528090-G
