16
Spirea
2
R
1.
2.
1.
A
A
2.
B
B
3.
C
D
Adjusting the backrest height
1.
"
(A) at the bottom of the backcloth. Then, fold
the chair slightly, by lifting the seat upwards.
2.
Loosen screws (B) on the back of the backpipe
with an Allen key. It is now possible to lower and
raise the back.
X^
Adjust the height of the armrests
1. Flip up armrest
If your chair is equipped with armrests that can be
raised or lowered, this is achieved by loosening the
screw (A), moving the armrest into the required
position and retightening the screw.
2. Detachable armrest
If your chair is equipped with armrests that can
be raised or lowered, this is achieved by pulling
up the armrest and loosening the screw (B) under
the armrest. Move the screw up or down to the
desired position and retighten the screw. Lower
the armrest again.
ARMRESTS
X^
BACKREST
X^
3. Height adjustable armrest
Adjust the height of the armrests by turning the
knob or Allen key screw (C), setting the required
height and then re-tightening the knob/screw.
Depth
Y
ou can also adjust the depth of the armrest pad.
Loosen the knob (D), set the pad in the required
position and re-tighten the knob.
When adjusting the height, do not put your
fingers between armrest pad and side plate as
they may get trapped.