manualshive.com logo in svg

Invacare rea Spirea 2, User Manual, Page: 15 / 36

Share
Download
Invacare rea Spirea 2 User Manual Download Page 15

15

Spirea

2

R

1. 

2. 

1.

A

A

A

A

A

A

A

2.

D

B

C

1.

 

Adjusting the seat depth

 

Fold the seat slightly. Lift up the rear part. Pull into 
required depth.

SEAT

2.

 

Adjustment of seat with variable shape

+     (      
 z  )     ^ " 
straps to adjust the shape of the seat. Always have 
a cushion on the seat when testing its adjusted 
shape.

X~

2. Calf pads

 

The calf pads can be fitted in four different depth 
^€  ^"
(B) using an Allen key. Remove the large nut (C) on 
the reverse side and place it in the other attach-
ment hole. Move the calf pad to the new position 
and secure it into place with the screw. 

 

The height of the calf pads can easily be adjusted  
using the handwheel (D).

1. Angle-adjustable footplates

 

Adjust the angle and the depth by loosening the 
screw (A) at the footplate attachment with a 5 
mm Allen key.  Adjust the footplate to the correct 
position and retighten the screw. 

Do not place anything on the footplate when 
the screw is loose.

X~

FOOTPLATES/CALF PADS

Summary of Contents for rea Spirea 2





































Reviews:

No comments