11
Spirea
2
R
1.
2a.
3.
4.
2b.
C
B
B
A
1.
Start by removing the armrests.
Flip up armrests
Press the button (A), swing up the armrest.
Lift it straight up (you may need to hold it slightly
forward then lift it straight up) (B).
Detachable
armrests
When having detachable one´s, just lift them up.
Transport
When you are to transport the Rea
®
Spirea
2
you can easily remove certain parts to make the chair smaller and
lighter.
Concerning the brake
The lever of the brake where the handle is located,
have a free play. The lever folds up automatically
when the legrest have been swinged to its outward
position without activating the brake. To activate
the brake just press respectively pull at its most
forward respectively rear located position.
2a.
Remove the footrests by pressing the level (B),
whilst turning the footrests outwards or inwards
and pull them straight up.
Be careful not to trap your fingers between
frame and footrest.
2b.
Remove the legrests by pressing the level (C)
backwards, whilst turning the legrests outwards
and pull them straight up.
Be carefull not to trap your fingers between
frame and legrest.
3.
+ |"| ^
of the sides of the seat and fold the chair com-
pletely.
If you have a backrest bar release it first by pressing
on the small nob on the inside of the tube. It will
automaticlly fall down to the side.
4.
Remove the rearwheels by pressing the buttom
in the centre of the hub whilst pulling the wheel
away from the wheelchair. Finally, fold the anti-tip
devices upwards (see page 23).